Is it posible for the IPBX to support range of IP addresses like
192.168.20.1-254
192.168.21.1-254
192.168.22.1-254
192.168.23.1-254
192.168.24.1-254
192.168.25.1-254
While the IPBX is on 192.168.20.10
the client has the above scenario, at the moment only Phones on dot 20 can work, can someone assist
The client is eagerly waiting for favourable reply
Hi Canna,
What's wrong with a subnet mask of 255.255.0.0? A Class B subnet mask such as this will support 65535 IP addresses.
That's 192.168.0.0 to 192.168.254.254.
The firewall in P series is already set up to do this (see below).
Then all you need to do is to set up your IP range. See below also.
As long as the subnet is a class that allows the IP addr of your PBX, then it will be visible to the entire subnet (in which case you can create firewall rules to avoid traffic you don't want to see).
I hope this helps you.
Hi canna,
You can enable remotely in the extension settings to let the phones in other network segments to register, If the problem you meet is cannot register on the extensions on those phones.
Unified Communications
