Hi,
is it possible to use sip forking on Yeastar P550 P-series? Can I connect the PBX to my LAN with an ethernet cable and can all outgoing calls use the isp connection (IP and not use FXO, FXS, BRI)?
Thanks
Hi,
is it possible to use sip forking on Yeastar P550 P-series? Can I connect the PBX to my LAN with an ethernet cable and can all outgoing calls use the isp connection (IP and not use FXO, FXS, BRI)?
Thanks
Yes SIP-Forking is possible on Yeastar P-Series. You will need a firmware newer than March 2021.
But you can´t control which phone will be used bei AMI / TAPI. If you have 3 phones with the same SIP-ID (Extension) logged in and you try to control a phone by TAPI (AMI), one of the 3 phones will answer. But which one is not clear (I found no rules).
There is a plan to let answer all phones. But up to date, it is just a plan.
I have installed the Linkus-Client too. With the CTI-Settings in the Linkus Client I am able to control which phone will be controlled by the TAPI/AMI.
sip forking is support you need to increase the Concurrent Registrations first.
You can use sip trunk for all outbound calls.