Issue Description
In particular case, UDP stream might be blocked by ISP or firewall and connection between both systems therefore might fail, then TLS transport could be a workaround for the connection, this article shares the steps on how to connect Yeastar gateways to Yeastar P-Series PBX by TLS transport, it's more applicable for connection by VPN internet and FQDN domain.
Applicable Devices
Yeastar all type of Gateways
Steps
1. Enable TLS in P-Series PBX - SIP Settings - TLS, restart PBX accordingly.
2. Create account trunk with TLS protocol in P-Series PBX.
3. Enable TLS in Yeastar Gateway, take Yeastar TE100 fo example.
4. Register account trunk on gateway, take Yeastar TE100 for example.
5. Check register status in both system.
0 Comments