Scenario
In some special scenarios, the user needs the analog phone to automatically dial a specific number when the handset is taken off.
Applicable to
Yeastar FXS gateway
Yeastar P series PBX
Yeastar S series PBX
Configuration
This feature is named hotline on Yeastar devices, a setting in FXS extension settings. as shown below.
Make sure there is an outbound route to dial this hotline number.
For example, enable hotline, hotline number set to 123456789, delay dial set to 2s.
It means, when take off the analog phone handset, this FXS extension will dial 123456789 after 2s.
Yeastar FXS gateway
Yeastar P series PBX
Yeastar S series PBX
0 Comments