Symptom:
All modules on the EX08 could not be detected.
Check List:
-
Check the if any physical damage and contact problem for the EX08 card.
-
Reinstall the EX08 card.
-
Swap slot to install the EX08 board if your PBX is S300, and check again if the modules could be recognized on the web.
-
Swap a EX08 card, if you have one.
Logging: (If you can’t resolve the issue, please submit the following information to Yeastar)
-
Post us the test result of the check list.
-
Post us the System Log.
0 Comments