How to Connect Yeastar TE to AskoziaPBX – Yeastar Support

1. Introduction

This guide shows you how to connect Yeastar TE PRI VoIP gateway to AskoziaPBX via SIP trunk. This guide has been tested with:

TE100 firmware version: 16.18.0.2
AskoziaPBX version: 4.0.3

Target:

After connecting Yeastar TE PRI gateway and AskoziaPBX, physical trunk E1 trunk will be extended on AskoziaPBX.

The following features can be achieved:

Make outbound calls from AskoziaPBX via the E1 trunk of TE100.
Receive calls from E1 trunk of TE100 at AskoziaPBX.

Description：

IP address of AskoziaPBX: 192.168.6.112.
IP address of TE100: 192.168.6.129.

Figure 1 Connect AskoziaPBX and Yeastar TE100

2. Connect AskoziaPBX to Yeasar TE100

2.1 Create a SIP account on Yeastar TE100

Figure 2 SIP account Settings

Trunk Type: choose “Account” type.
Name: a unique label to help you identify this trunk, i.e. Askozia.
Account: define the account number, here we set “8000”.

Note: the account number must be different from Askozia extensions.

Password: set a password for the account number, here we set “yeastar8000”.

2.2 Create a SIP Trunk on AskoziaPBX

1) Log in to the AskoziaPBX Management Console and go to “Accounts→Providers” and click to add a SIP trunk.

Figure 3 Add VoIP Trunk on AskoziaPBX

2) General Settings for the SIP trunk.

Figure 4 SIP Trunk General Settings

Name: a unique label to help you identify this trunk, i.e. Yeastar.
Host: fill in Yeastar TE100’s IP address, “192.168.6.129”, the default port is 5060.
Username: fill in the account number created on Yeastar TE100, “8000”.
Password: fill in the Yeastar TE100’s account password.

3) Call Routing for the SIP trunk.

Figure 5 SIP Trunk Call Routing

Outgoing Paterns: set the outgoig patterns for outgoing calls, here we define the patterns as “9|.”, meaning that Askozia users should dial “9+number” to make outgoing calls.
Incoming Extensions: set the destination for incoming calls to AskoziaPBX. Here we set the destination as extension 101.

4) After finishing the configruation, click “Save”, you can check the SIP trunk status. The green icon indicates that the SIP trunk is successfully registered to Yeastar TE100.

Figure 6 SIP Trunk Status

3. SIP to E1

In this section, we introduce how to achieve making outbound calls from AskoziaPBX through E1 trunk on TE100.

Figure 7 SIP to E1

Step 1. Configure “SIP_to_E1” route on TE100.

Path: Gateway→Routes Settings→Route List

Figure 8 SIP- to- E1 Route

Route Name: give a name for the route, “SIP_to_E1”.
Call Comes in From: choose the VoIP account which is registered to AskoziaPBX.
Send Call Through: choose the E1 trunk.

Step 2. Test a call from AskoziaPBX.

Now, you can use AskoziaPBX phone system’s extension to make external calls through the TE100’s E1 trunk. Do not forget to add digit 9 before the called number cause prefix is set to 9 on AskoziaPBX outbound route. For example, if you want to call 5503301, you need to dial 95503301.

4. E1 to SIP

In this section, we configure incoming calls to AskoziaPBX through E1 trunk on TE100.

Figure 9 E1 to SIP

Step 1. Configure the “E1_to_SIP” route on TE100.

Path: Gateway→Routes Settings→Route List

Figure 10 E1-to-SIP Route

Route Name: give a name for the route, “E1_to_SIP”.
Call Comes in From: choose E1 trunk1.
Send Call Through: choose the VoIP account which is connected to AskoziaPBX.

Step 2. Test a call.

Dial the E1 trunk number on your phone, the call will be routed to AskoziaPBX’s extension 101.

0 Comments