Summary--How to Extend Lync 2013 to MyPBX, please refer the below link:
https://support.yeastar.com/hc/en-us/articles/217640048
Part 2--Set Up Rules in MyPBX Web Interface, please refer the below link:
https://support.yeastar.com/hc/en-us/articles/217640058
1. Enable user for Lync Server 2013
Note: please create your account in DC first before adding it into Lync Server.
Enable Lync account in “Microsoft Lync Server 2013 Control Panel”.
Open “Microsoft Lync Server 2013 Control Panel” and log in.
Figure 1
Click “Users” to enable the account and assign a number to the user, in this example:
User: harry
The number is: +800
Click “Enable Users” to start:
Figure 2
Click “Enable Users”.
Figure 3
Click “Add”.
Figure 4
Click “find”. Choose the account “harry” before clicking “OK”.
Assign user to pool: lync.yeastar.com
For user's SIP URL to log in the client software, we recommend using user’s email address
Telephony: Enterprise Voice
Line URL: tel:+800
Figure 5
Click “Enable” to save it.
Log in the client software with the new account: harry@lync.yeastar.com to test if it is successfully added as a Lync Server user.
Figure 6
Open Lync client software and log in lync.yeastar.com using “harry@lync.yeastar.com”.
Figure 7
Figure 8
2. Create call rules in control panel
Note: the extension number of Lync Server 2013 starts with “+”.
Edit the “Global” dial plan.
Figure 9
Edit the rule of “Keep All”; we need to add a “+” as the prefix.
Figure 10
Modify the length to “Any”, add “+” in field “Digits to add”, then click “OK” to save it
Figure 11
You can input the test number to see if the translation rule works fine.
Figure 12
Edit the “Voice Policy”“Global”.
Figure 13
Click “Select” and choose the Local into “Associated PSTN Usages”.
Figure 14
Figure 15
Figure 16
Click “OK” to save it. Edit the “Route” page.
Figure 17
Click “LocalRoute” to start editing.
Figure 18
The default value is: ^(\+1[0-9]{10})$
Click Edit to modify the default pattern to ^(\+\d*)$
Figure 19
Click “OK” to save it, and you will see the modified patten as below:
Figure 20
Add the associated trunk:
Figure 21
Choose the gateway we created to MyPBX, in this example: PstnGateway: 192.168.4.142.
Figure 22
Figure 23
Select the associated PSTN Usages:
Figure 24
Choose “Local” and “OK” to save it.
Figure 25
Figure 26
Click the “PSTN Usage”, make sure the Routers is “LocalRoute”, Policies is “Global”.
Figure 27
Edit the “Trunk Configuration” page.
Figure 28
Click “Global” to start.
Figure 29
Click “Select” to choose the associated PSTN usage for this trunk.
Figure 30
Chose “Local” in this exaple, click “OK” to save it.
Figure 31
Click “OK”.
Figure 32
You can see the PSTN usage here, click “Commit”“Commit all” to take effect.
Figure 33
Click “Test Voice Routing” to see if our rules are correct.
Figure 34
Test result: Passed. The configuration on Lync Server 2013 is completed.
0 Comments