Introduction
With this guide, we can know more details about the LED Indicators and PBX Monitor status of S-Series VoIP PBX.
LED Indicators
|
LED |
Indication |
Status |
Description |
|
POWER |
Power status |
On |
The power is switched on |
|
Off |
The power is switched off |
||
|
System |
System status |
Blinking |
The system is running properly |
|
Solid On/Off |
The system goes wrong |
||
|
WAN |
WAN status |
Solid Green light |
Linked normally, 10/100 Mbps. |
|
Solid Orange light |
Linked normally, 1000 Mbps. |
||
|
Blinking |
In communication. |
||
|
Off |
Offline. |
||
|
LAN |
LAN status |
Solid Green light |
Linked normally, 10/100 Mbps. |
|
Solid Orange light |
Linked normally, 1000 Mbps. |
||
|
Blinking |
In communication. |
||
|
Off |
Offline. |
||
|
RJ11 Port Status |
FXS |
Green light |
a. Solid: The port is idle. b. Blinking: There is an ongoing call on the port. |
|
GSM/3G |
Red light |
a. Solid: the trunk is idle. b. Blinking slowly: there is no SIM card inserted. c. Blinking rapidly: the trunk is in use. |
|
|
BRI |
Orange light |
a. Blinking slowly: the BRI line is disconnected. b. Solid: the BRI line is connected or in use. |
|
|
FXO |
Red light |
a. Solid: the PSTN line is idle. b. Blinking slowly: no PSTN line is connected to the port. c. Blinking rapidly: the PSTN line is busy. |
Extension Status
Path: PBX Monitor>Extension Status
|
Status |
Description |
|
|
The extension is idle. |
|
|
The extension is ringing. |
|
|
The extension is unavailable. |
|
|
The extension is busy. |
|
|
The extension is on hold. |
|
|
Malfunction in FXS interface; please examine the relevant interface and module. |
Trunk Status
Path: PBX Monitor>Trunk Status
| FXO Trunk Status | |
 |
The trunk is idle. |
|
|
The trunk is busy in use. |
|
|
No PSTN line plugged in FXO interface. |
|
|
Malfunction in FXO interface; please examine the relevant interface and module. |
|
GSM/3G Trunk Status |
|
|
|
The trunk is idle, the icon shows the signal strength. |
|
|
The trunk is busy. |
|
|
The module is powered off. |
|
|
No SIM card inserted. |
|
|
No signal. |
|
|
PIN/PUK Error. |
|
|
GSM network registration failed. |
|
|
Malfunction in module; please examine the relevant module. |
|
BRI/E1/T1 Trunk Status |
|
|
|
The trunk is idle. |
|
|
1. Broken module/interface. 2. Incorrect physical layer configuration. 3. Service provider did not activate the trunk. |
|
|
1. Incorrect protocol layer configuration. 2. Service provider did not activate the trunk. |
|
|
1. Malfunction in interface/module; please examine the relevant interface/module. 2. No trunk plugged in. 3. Service provider did not activate the trunk. |
0 Comments