Using LDAP on Tiptel phones

 

This document demonstrates how to configure and use LDAP phonebook on Tiptel phones. 

Requirements:

Tiptel 3110, 3120 or 3130 with firmware 3.0.192 or higher

Tiptel 3210, 3220, 3230, 3235 or 3240 with firmware 3.41 or 5.191 and higher

  • Configure LDAP on Tiptel Web GUI
  • Configure a LDAP soft key on Tiptel Web GUI
  • Configure LDAP Server on S series PBX

Configure LDAP on Tiptel Web GUI

  1. Log in the Tiptel phone web interface, navigate to “Phonebook -> LDAP” page.
  2. Fill in the LDAP server address, attributes etc (refer to figure 1 for an example)
  3. click “Ok” to apply.

                                                                                Figure 1

LDAP Name Filter: (|(cn=%)(sn=%))

LDAP Number Filter: (|(telephoneNumber=%)(homePhone=%)(mobile=%))

Server Address: 172.27.133.165       //IP address of PBX

Port: 389

Base: dc=pbxnl,dc=com

UserName: cn=admin,dc=pbxnl,dc=com

Password: password         //substitute with the password filled in on LDAP server setting page of PBX

Max.Hits(1~32000): 50

LDAP Name Attributes: cn sn displayName

LDAP Number Attributes: telephoneNumber homePhone mobile mail departmentNumber

LDAP Display Name: cn sn

Max Hits: 50

Search Delay Time: 1000

 

 

Configure a LDAP soft key on Tiptel Web GUI

  1. Log in the Tiptel phone web interface, navigate to “Phone > DSS Key”.
  2. Configure the settings as shown in the circled box

 

Configure LDAP server on S series PBX

Note: change pbx to pbxnl to be consistent with the parameters filled on Tiptel configuration setting.  

 

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.