Manually Register an Htek Phone to Yeastar S-Series VoIP PBX

Follow the steps below to configure Htek phones.

1. Log in the Htek IP phone web user interface.
   • Username: admin
   • Password: admin

2. Click “Account” Tab.  
• Account: choose one account.
• Account Active: Yes
• Primary SIP Server: fill in Yeastar S-Series PBX’s IP address.
• SIP Transport: choose “UDP”. The default SIP transport on Yeastar S-Series is UDP.
• Label: set the name you want to appear on the phone display.
• SIP User ID: fill in the extension number.
• Authentication ID: fill in the extension’s “Register Name”.
• Name: the local phone name showing on the other phone when calling

3. Click “Save Set”.

4. Check the extensions status. If the extension is registered to Yeastar S-Series successfully, the “Account Status” will show “Registered”.