Unified Communications
Roel Koster
- Total activity 69
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 2
- Subscriptions 28
Activity overview
Latest activity by Roel Koster-
Roel Koster commented,
Our customers have the same problem: "The problem is when they call to another company and there is the call transfered, the audio is gone" The customer has a Yeastar (asterisk) PBX, the another co...
-
Roel Koster commented,
How to this for analog extensions for a custom ringtone?
-
Roel Koster commented,
Will it be implemented in a future firmware release? It is common in old pbxs to hear the difference between internal/external calls. I have to manually add this to the extensions_custom.conf file
-
Roel Koster created a post,
firmware update MyPBX another way
I tried to update an MyPBX SoHo V6 via the webinterface, it doesnt work (both TFTP and WEB). So I tried it via SSH: command: root@MyPBX:~# tftp -gr 70.19.0.48.bin -l persistent/imageupdate/uImage 1...
-
Roel Koster created a post,
Solution for problems with linkus app
We had problems with the linkus app, when it is used in another network than the local network e.g. 4G network. A solution for this is to use another SIP port than the standard 5060 UDP port, becau...
-
Roel Koster commented,
is Tricomvoip also usable for more than 100+ extensions? is it avialalbale in Dutch language? and does it show also queues and trunk activity?
-
Roel Koster commented,
you can use FOP2 panel, but you have to setup a server for this, see anaother post in this forum
-
Roel Koster created a post,
different ringing tones for FXS port
is it possible to set different ringtones for the FXS ports. So you can hear if it is an external or internal call. Same as "distinctive ringtone". [bell]exten = 80,1,Wait(1)exten = 80,n,Dial(DAHDI...
-
Roel Koster commented,
I Have running fop2 on a separate server. Here are the steps i have done: (some linux/asterisk knowledge is essential) - install ubuntu 14.04 server on your server - at the last step of installa...
-
Roel Koster created a post,
display transferer and transferee when a call is transfered
S-Series now have one option where you can set it to Auto and the system would first show the transferor number and after transfer, the tranferee number. check two two settings on SIP setting page:...