Gary
- Total activity 150
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 12
- Subscriptions 66
Comments
Recent activity by Gary Sort by recent activity-
If you can't find the [macro_realstexten] section by using command 'cat extensions.conf | tail -n +400', then you can use command 'cat /etc/asterisk/extensions.conf' and then you can find it.
-
If you get error code 488 when making outgoing call through the sip trunk, then please disable the SRTP on the guide Step 3.
-
If you can't find two-factor authentication on the 'Security' tab, you can search through the search bar on the Google account settings page itself.
-
It seems the Sipgate side made some changes, they request the phone number in the p-preferred-identity field format should be 49xxxxxx instead of 0xxxxxx. In that case, you can set the “Inbound Cal...
-
If it still has the sip trunk registration issue. Please check the exact DNS address offered by Telekom and configure it in PBX’s network settings page. 8.8.8.8 Or any other DNS address would no wo...
-
If it still has the problem, please set the From User to be the same as the Username as below screenshot
-
If you still get the register failed, and you capture the SIP debug log, and find the SIP provider replied with '403 Wrong Contact format see 1TR119', then please try to make a customize as below g...
-
Hi Benjamin, I checked this issue with one of our customers, and I found it was Telekom that sent '403 Forbidden' to us when we made an outgoing call. I think it is Telekom side issue, could you pl...
-
Hi Stefan, In that case, please contact Companyflex to check it and ask them what they changed.
-
If port 5060 doesn't work, please try to use port 0.