Gary
- Total activity 151
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 12
- Subscriptions 66
Articles
Votes on activity by Gary Sort by votes-
Registering Panasonic IP Phone to S-Series VoIP PBX
This guide has been tested with Panasonic KX-HDV130 with S-Series VoIP PBX firmware version 01.008, and is applicable to the following Panasonic IP Phones. KX-HDV130, KX-UT113, KX-UT123, KX-UT133, ...
-
Why Microsoft Teams Call gets drop when Linkus call come in
[Issue Description] When you are on a Microsoft Teams Call and a Linkus Call(Linkus Desktop or Linkus web client) comes in, the Teams call drops completely. [Applicable Models] Linkus Desktop cli...
-
Why Linkus Desktop can't see Company contacts
[Issue Description] The extension already has the view Company Contacts permission, however, it can't be displayed on the Linkus Desktop, but it can be displayed on the Linkus Webclient. [Applica...
-
BRI Basic Installation Guide
This article aims at BRI basic configuration in Yeastar S-Series VoIP PBX. And we divide this guide into 2 parts. 1. Physical Configuraion. 2. Web Configurations and Adjusting in SSH. Physical Co...
-
How to connect Fritz!Box to Yeastar FXS gateway
1. Introduction This application note shows how to connect Fritz!Box to Yeastar FXS gateway. In this guide, we will take Yeastar TA200 and TA400 as an example. Target： Make calls between Fritz!Bo...
-
Linkus Desktop client without Chat feature
[Issue Description] When the Linkus Desktop client registers to P-series PBX, there is no Chat feature on the Linkus Desktop. [Answer] For P-series PBX, the Linkus desktop doesn't support the ch...
-
Why it Shows Exclamation Mark on the Extension List Page?
Applicability Model: S-Series, K2, Cloud PBX Version: Any The PBX has a default rule to limit users to make a maximum of 5 outbound calls in 1 minute. You can set the Outbound Restriction rule ac...
-
Displaying the Caller Number after Call Pickup
Introduction Most of the customers meet this kind of problem: When you using call pickup to pickup the call, then on your IP phone's screen, you would just see the '*04' or '*4', but actually you n...
-
Why recently can't make outgoing calls through Sipgate sip trunk?
[Issue Description] The Sipgate sip trunk was working fine on your PBX, but recently when you make outgoing calls through the SIP trunk, then received '403 Forbidden' from the SIP provider, and at ...
-
Why can't edit the 'Thank You for Your Patience' Prompt
[Issue Description] In the Queue->Preferences page, can't edit the 'Thank You for Your Patience' Prompt. [Applicable Models] Yeastar P-series PBX [Solution] It is the System prompt issue since...