Gary
- Total activity 155
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 13
- Subscriptions 68
Activity overview
Latest activity by Gary-
Gary commented,
If you get no audio issue at the S-series PBX side, you can enable the "RTP Keep-alive" and "Inband Progress" on the Trunk to Cloud-PBX
-
Gary created an article,
Why the Queue didn't play MOH
[Issue Description] In the Queue, you set the MOH, but when you call to the Queue, it didn't play [Applicable Models] Yeastar P-series PBX [Solution] If you want to set the MOH(the prompt that...
-
Gary created an article,
Why recently often gets Easybell sip trunk lost registration
[Issue Description] The Easybell sip trunk was working fine on your PBX, but recently often gets sip trunk lost registration [Applicable Models] Yeastar P-series PBX [Reason] The sip provider c...
-
Gary created an article,
How to register Netcologne sip trunk with TLS in P series PBX
[Issue Description] In this guide, we will show you how to register Netcologne sip trunk with TLS in P series PBX Note: Currently the ITSP template is only for Netcologne with UDP, in the future we...
-
Gary created an article,
How to register Easybell sip trunk with TLS in P series PBX
[Issue Description] In this guide, we will show you how to register Easybell sip trunk with TLS in P series PBX Note: Currently the ITSP template is only for Easybell with UDP, in the future we wil...
-
Gary created an article,
How to Configure Vodafone Sip Trunk in PAE and PSE
In this guide, we will show you how to register Vodafone sip trunk in P-series Appliance Edition(P550/560/570) and P-series Software edition. Normally, Vodafone will provide the sip trunk inform...
-
Gary commented,
If you can't find the [macro_realstexten] section by using command 'cat extensions.conf | tail -n +400', then you can use command 'cat /etc/asterisk/extensions.conf' and then you can find it.
-
Gary commented,
If you get error code 488 when making outgoing call through the sip trunk, then please disable the SRTP on the guide Step 3.
-
Gary commented,
If you can't find two-factor authentication on the 'Security' tab, you can search through the search bar on the Google account settings page itself.
-
Gary created an article,
How to solve the problem when connecting TAPI with Linkus desktop gets the warning 'incompatible with TAPI.DLL'
[Issue Description] When connecting TAPI with the Linkus desktop, some computers might get the Warning 'Some calling device drivers are incompatible with TAPI.DLL, Please install a newer version.' ...