Andy Lin
- Total activity 36
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 18
Activity overview
Latest activity by Andy Lin-
Andy Lin created an article,
How to solve LED issue in DS7210/DS7310
The Guide of Upgrade Display for Solving the LED abnormal issue Note:This version is targeted at LED going off and LED state switching failure of modelDS7210 and DS7310 Preparation: Upgrade the f...
-
Andy Lin created an article,
How to install Meeting room APK in ProDVX
1.After power on,connect ProDVX and computer via USB cable: 2.Swipe down the notification bar at the top of the screen,select USB mode to File Transfer: 3.Move the APK from computer to root ...
-
Andy Lin created an article,
Why did the call go to incorrect destination
Applicability Model: S-Series, P-Series (Appliance edition) Firmware version: Any Symptom You have some trunks from same provider in the PBX,and you can receive the call but it goes to incorre...
-
Andy Lin created an article,
How to configuration Ink-Display via NFC
Preparation DS3604 can be configured via NFC-enabled smart phone. 1. Download and install “Milesight ToolBox” App from Google Play or App Store. 2. Enable NFC on the smartphone and open Milesight T...
-
Andy Lin created an article,
Why always see the notification of 'Abnormal License Activation' in Dashboard?
[Issue Description] When you login PBX web,you always see the pop-up about 'Abnormal License Activation' although you close it. [Applicable Models] Yeastar P-series appliance and software ed...
-
Andy Lin created an article,
Why is pickup still not working after giving the extension permission in P-series PBX?
[Issue Description] When you give the permission of pickup call to extension in extension group,still can't pick up the call: [Applicable Models] Yeastar P-series PBX [Solution] Please chec...
-
Andy Lin created an article,
How to Re-install the Room Display APP in DS7510
1.You can install new APK.Get it from our web: https://www.yeastar.com/firmware-download/ Download the APK you need(Room display or Vistor Kiosk) 2.If you don’t bind the DS7510 to Workplace,you ...
-
Andy Lin created an article,
How to Use Another Site's Trunk between P-series and S-series PBX
Introduction From the article: How-to-connect-P-series-PBX-and-S-series-PBX-as-Headquarter-and-Branch you wound know how to connect P-series PBX and S-series PBX as Headquarter and Branch,t...
-
Andy Lin created an article,
P-series cloud PBX can't receive call
If you can't receive the call in P-series cloud PBX,please follow the steps: Check the DID number in the Trunk and Inbound Route: If you add 0 before the real number such as 987654321,please...
-
Andy Lin created an article,
How to connect P-series PBX and S-series PBX as Headquarter and Branch
Introduction This article introduces of how to connect P-series PBX and S-series PBX as Headquarter and Branch.We use P550 and S100 as example. Preparation Two PBXs are able to access each other...