
Rolf
- Total activity 28
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 9
Activity overview
Latest activity by Rolf-
Rolf created a post,
Linkus Update / path
Good Morning On our Customer side we geht the Update Message from the new Light Client. Is there a way to disable this? Or is there a way to ad an installDir in the command line? Br Rolf
-
Rolf commented,
Hi Peter we use Time Condition. Hollyday, play IVR, then move to Global Voice. Last Rule If Worktime go to Ring Group. If no one is there it goes to the Global Voice. In this condition we have 2 V...
-
Rolf commented,
Hello Peter add another time condition for the Holliday. on the inbound roule move it to the top that it match the date. For example if 1/12023 then play holliday1. If 1/2/2023 then play holliday2....
-
Rolf created a post,
Linkus Autoprivioning Cluster
Hi we have a S300 Failover Cluster. SystemA have the IP 10.41.40.51 SystemB have the IP 10.41.40.52 Virtual IP 10.41.40.50 If we provisioning the Linkus Client with the E-Mail we geht the wrong IP ...
-
Rolf created a post,
Linkus Tray Icon missed Calls
Would be nice Best regards Rolf
-
Rolf created a post,
1FXS Port and 2 Numbers
AnsweredHi Forum I have a location with 2 doorbells. One calls 123 and one calls 456. Is there a way to display the sender's phone number instead of the one from the FXS port?System is an S100Best regardsRolf
-
Rolf commented,
Hi Ericwe are running 30.14.0.161. Dont read something about in the latest Update. So we doesent force it.RegardsRolf
-
Rolf commented,
Hi Eric, We found the Problem. We have Hot Standby Enviroment.If we send the Link for the Linkus Registration we get the IP from System1 instead the virtual IP.
-
Rolf commented,
Hi Eric sorry for the delay. we have for the local Hostname the IP Address. But that doesent work. You always get "wrong user or password" If we use the internal IP or the FDQN on the External Tab...
-
Rolf commented,
Hi Eric Linkus can not register over LAN. We use the Linkus Client on Win 10 Computer with Headsets.We also use different VLAN for the Clients. We added all subnet to the NAT table in the S300.