
Marek Sinkora
- Total activity 12
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 3
Activity overview
Latest activity by Marek Sinkora-
Marek Sinkora commented,
Can be MyPBX client used together with MyPBX-Standard V4?
-
Marek Sinkora commented,
There is no way how DID can be changed because it must go through provider credentials security. Unfortunately, MyPBX always passes original DID through Callback and there is no way how to change i...
-
Marek Sinkora commented,
I have the Callback option in version 2.18.0.22 for Inbound Routes and it is certainly enabled. Otherwise, the callback probably should not work. A problem is a second part - you have the Destinati...
-
Marek Sinkora commented,
Inbound Route destination works for everything which is inside of MyPBX, i.e. extension, voicemail, IVR, queues, etc. However, if I use outbound route to the same VoIP trunk, I create a loop at the...
-
Marek Sinkora created a post,
Returning call from CallBack is hanged up by MyPBX
We have problem with CallBack functionality in MyPBX-Standars V4 equipped by FW 2.18.0.22. Functional part is this: "MyPBX allows caller A to dial an inbound route number, and after hearing the rin...
-
Marek Sinkora commented,
Thanks for answer. Following is how system behaves when line is busy. The path of the second call to the busy line is from SIP phone A.A.A.A (extension 516) to our MyPBX B.B.B.B passed to SIP provi...
-
Marek Sinkora commented,
I do not want to include a prompt of silence! I want to end a call when extension is busy. I am absolutely sure that BRI gives the back signal correctly (Cause Value= "#17 User busy"). This is why ...
-
Marek Sinkora commented,
Sorry for difficulties. We have B2 modules and inboud rule is: - when DID numbers are right - coming from SIP trunk - route to ISDN outbound Outbound ISDN route is: - when Dial Pattern is right -...
-
Marek Sinkora created a post,
Prompt instead of busy signal from MyPBX when using BriTrunks
We have MyPBX-Standard V4 with 2.18.0.22 firmware. MyPBX is connected to ISDN-PBX through two BRI modules (four BriTrunks). External inbound calls from SIP trunks are routed to outbound routes for ...