
Hernan Halim
- Total activity 16
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 5
Activity overview
Latest activity by Hernan Halim-
Hernan Halim commented,
Is this also valid for IOS device? Because I have been trying it with my iPhone but always got error message regarding certificate verification failed. But its connected successfully with my Androi...
-
Hernan Halim commented,
OK, finally I'm able to fix this issue. In my Huawei HG8245H it has ability to use a secondary IP address. So I activate that feature. And in the S20 Network, I use the primary 192.168.100.1 / 255...
-
Hernan Halim commented,
Hi Oscar, Yes its worked BUT only when I plug my LAN cable to port number 2 in the router. If I plug the LAN cable on port number 1 or 3 or 4, defenately wont work. The number 2 LAN port is a priv...
-
Hernan Halim commented,
My router IP is 192.168.100.1 / 255.255.255.0
-
Hernan Halim commented,
Hi, thank you for your respond.So the 10.0.0.10 / 5060 is the SIP Trunk Server IP address. The one I give 10.9.22.37/255.255.255.0 is the WAN information on my router. Yes, no physical WAN port, on...
-
Hernan Halim commented,
Thank you for the info, but unfortunately that doesnt work for me. So the scenario is like this. I have 3 SIP Trunk Account. A is from my telecom provider (with private sip trunk)B from skypeC from...
-
Hernan Halim commented,
Try this configuration but defenately not working for me. So the scenario is like this. I have 3 SIP Trunk Account. A is from my telecom provider (with private sip trunk)B from skypeC from some oth...
-
Hernan Halim commented,
Hi, sorry if I dont clarify my situation clearly. So my telecom provider are provided me with a wireless router with 4 ethernet port. This router has special ethernet port (number 2) which only fun...
-
Hernan Halim created a post,
S20 WAN and LAN Port
I just got my S20 IP PBX and I actually have this problem and make me confuse. So I have an Internet Account coming with a SIP Trunk. Both of this, coming from 1 single router Huawei HG8245H (Ont m...
-
Hernan Halim commented,
Hi, I have got the answer for my problem. So its basically on the SIP Setting, need to change the setting for Outbound Parameter to "From User" and that fixed the problem.