Maciej Kwadrans
- Total activity 17
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 4
Activity overview
Latest activity by Maciej Kwadrans-
Maciej Kwadrans created a post,
S100 Auto Provisioning between different LANs
Hello ! I was not able to find someting similar here so I've decided to write my own thread.Scenario. Network with many LANs. All connected togetweh with VPN Lan2Lan.We have one Yeastar S100. Autop...
-
Maciej Kwadrans commented,
Here you go: https://drive.google.com/file/d/13jFfmWxPr0HxTFH25ucJvloJrBNY7aUa/view?usp=sharing
-
Maciej Kwadrans commented,
So here is our network structure:Modem from ISP ( In Bridge mode ) -> Our Main router (UBNT ERLite-3 with Public IP address -> LAN ( Included PBX ) Inside our LAN, we have many VOIP physical phon...
-
Maciej Kwadrans commented,
You were right. NAT and Port Forwarding did a trick.Now calls are not dropping after 30 seconds.But ... can't be ideal. First 4-5 second of the call is very distorted. After that period of time, al...
-
Maciej Kwadrans created a post,
S50, Linkus, connections are interrupted after 30 seconds
Product: Yeastar S50HW Version: V2.20 0000-0000Firmware 30.10.0.28 We have problem with Linkus.Every outgoing call is ending itself after 30 seconds. Beside Linkus we have of course other physical ...
-
Maciej Kwadrans commented,
Same here. Multiple Trunks, same issue.I will try to capture logs too.
-
Maciej Kwadrans commented,
Hi Oscar.I don't remember exactly but I think that this was starting happen more often after last ( or 2 firmwares before ) upgrade. Of course it sounds like a DNS issue but as I wrote before - eve...
-
Maciej Kwadrans commented,
Someone can help me ??
-
Maciej Kwadrans created a post,
VoIP Register Trunk Registration Failed / Re-registered
Good morning Yeastar Community.Another problem.S20Firmware: 30.8.0.14 We are using Event Notifications and very often during the day we are getting lot's of above two one so: VoIP Register Trunk R...
-
Maciej Kwadrans commented,
Hi Larry.You were right.Prv. Firmware and problem has been solved. I'm curious when Yeastar will rollout fix for latest version. Once again - Thanks for your help.