Microsoft Teams Integration
Hikvision Intercom Integration
ISDN Switch-off Migration
All materials to evaluate Yeastar as a PBX vendor on products, solutions, partner program, support, learning resources, etc.
Alex Benítez
- Total activity 17
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 6
Activity overview
Latest activity by Alex Benítez-
Alex Benítez commented,
Thank you Harry
-
Alex Benítez created a post,
Integration of Grandstream gateway GXW4108 to Yeastar S series
Hello I am looking for a procedure to integrate Grandstream GXW4108 to Yeastar S series PBX. Any experience on doing that? Please share Thanks Alex
-
Alex Benítez commented,
In our case the issue was solved after booting the pbx
-
Alex Benítez commented,
Hello James No. I have not rebooted the system.
-
Alex Benítez commented,
Hello Larry As far as I know extension 411 was manually provisioned. Thanks for your comments.
-
Alex Benítez created a post,
Yealink phone does not register after changing its extension number.
Hi friends I am experimenting this problem in a YEASTAR S50 IP PBX: The customer is changing a extension. The current number is 411, the new number is 440. The customer defined the extension 440 in...
-
Alex Benítez commented,
I am experimenting a similar issue, but with phone T49G. The customer changed the extension (user) and never registers. With old extension it registers fine but when the user is changed it does not...
-
Alex Benítez created a post,
How to route incoming calls to defined extensions
Hello I am definind two sites (one Elastix) and YEASTAR S50 by mean of IAX peer trunk. The customer wants to dial Yeastar PBX extension directly from Elastix PBX. How should I configure the incomin...
-
Alex Benítez commented,
Thanks Oscar I have seen that document. It is very helpful, but the thing is that my customer wants to use IAX trunk and the document is for SIP trunk. I am trying to define IAX peer trunk but I...
-
Alex Benítez created a post,
How to connect Yeastar S50 to Elastix
Hello I am trying to connect a Yeastar S50 to Elastix PBX with IAX trunks. The trunk looks up and running at yestar side but calls are not possible Elastix definitions PEER DETAILS host=172.26.2.11...