Jonathan
- Total activity 63
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 1
- Subscriptions 34
Activity overview
Latest activity by Jonathan-
Jonathan commented,
Please dial *800 on an extension with time conditions permission to fix this.
-
Jonathan commented,
Be careful of extension limits, for example a 16 user system may not fit inside an s20 due to the need for"dummy" extensions.
-
Jonathan commented,
Outbound routes don't set clip sadly which is a big problem for me. You would need separate trunks with different caller ids set.If only outbound routes were more like freepbx
-
Jonathan commented,
It will only work with dtmf feature code not with transfer buttons on phone.Quite annoying actually
-
Jonathan commented,
Upgrade the firmware on the phones.Does the external caller id appear when you blind transfer?
-
Jonathan commented,
You need to set stun in general >sip > nat on the yeastar and define the local network. Tick register remotely and nat on each extension.Sip service port on mikrotik is perfectly acceptable. Sip tr...
-
Jonathan commented,
You need to tick register remotely on the extension for any phone that's not on the same subnet as the yeastar
-
Jonathan commented,
Set "external" on inbound route distinctive ringOn your handset set external to match a different ring tone than the default.
-
Jonathan commented,
This will be because stun is enabled on zoiper and not on your remote extension ip phone
-
Jonathan commented,
Set a call forward from another extension to cause a loop.Generating an artificial bill. However the billing app can't generate a bill that a user would accept as a bill.