Unified Communications
Paul
- Total activity 23
- Last activity
- Member since
- Following 1 user
- Followed by 0 users
- Votes 0
- Subscriptions 11
Activity overview
Latest activity by Paul-
Paul commented,
Hi Alex, I guess this is not possible. As when a paging call happen, all the extensions in the paging group has answer the call automatically, means the phone has been pick up. So the system need t...
-
Paul commented,
Jeff, I think you can try configure the firewall. The fireware support to add a domain name. See below screenshot:
-
Paul commented,
Ivan, If you connect a laptop into 192.168.25.5/24 network, are you able to access the web GUI of the PBX? If yes, try install a softphone into the laptop and check if you can register.
-
Paul commented,
Which product do you use? What is the firmware version? Who is your IAX trunk provider? Does the IAX server use a dynamic IP address? I have encounter this issue with N412 around 6 monthes ago, whe...
-
Paul commented,
Roberto, As Oscar commented, it might be caused by busy detection. But if pull out and plug in the PSTN line didn't help, two possible reasons might caused this 1. FXO port fault - Check this by ...
-
Paul commented,
If you need FXS and FXO, you will need to purchase S2 module and O2 module. One S2 module supports for two FXS port which can be used to connect to analog phone or fax machina. One O2 module suppor...
-
Paul commented,
How about register multiple extensions/accounts in one IP phone and switch these extensions when dial out?
-
Paul commented,
The Restart Phone function of Yeastar doesn't work for every vendor's IP phone. I guess it doesn't support to reboot Grandstream's IP phone. Yeastar need to notify customers somewhere in the web GU...
-
Paul commented,
Thank you Oscar and Larry for sharing the knowledge with the community. It helps a lot for me to understand my one way audio issue.
-
Paul commented,
Agree with Larry, more info should be provided before someone can help.