Unified Communications
Carlo van Dongen
Voip specialist
- Total activity 75
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 14
- Subscriptions 17
Activity overview
Latest activity by Carlo van Dongen-
Carlo van Dongen commented,
Hi Oscar, The firmware version is 30.5.0.8. It happens every time with anonymous. We use sip trunking and we can reproduce the problem. I have log files, only have to make a Pcap.
-
Carlo van Dongen commented,
It looks like a provider issue, the call was to short for recording and we don't have wireshark running 24/7, lateron the call was made without any problem.
-
Carlo van Dongen commented,
In the logs I see a little differance. In the log with number I see; == Parsing '/etc/asterisk/pjsip.conf': Found == Parsing '/etc/asterisk/pjsip_auth.conf': Found == Parsing '/etc/asterisk/pjsip_w...
-
Carlo van Dongen created a post,
Transfer issue
Hi all, Maybe one of you know a solution. I have a strange problem on a S100 PBX. When a customer calls to my client, they always got answered by the reception. The recpetion transfer the call ...
-
Carlo van Dongen commented,
Even getting more strange, today everything is working fine again.
-
Carlo van Dongen created a post,
Cannot make call to specific number
Hi, I have a strange problem, from this morning I cannot make calls to 1 specific number. == Using SIP RTP Audio CoS mark 5 -- Executing [06512XXXXX@DLPN_DialPlan219:1] YsWalkContext("PJSIP/219-0...
-
Carlo van Dongen commented,
This sounds like a normal behavior. If you call a mobile and the phone is nor reachable,mit will go to the voicemail of the mobile. So please explain what is going wrong.
-
Carlo van Dongen commented,
What you wanne do with the IVR, What devices are connected to what and where you wanne route the calls to?
-
Carlo van Dongen commented,
Thanx Oscar, I gonna try to do somethings with this rules, Hope I don't lockout my self ;)
-
Carlo van Dongen commented,
Hi Oscar, Thats what I understand to, but direct under it, it have a line with 40/2s on the same UDP 5060 port. Why is on that line specified 40 packets whit 2 seconds and what is a packet? For me ...