
Larry Neblett
- Total activity 1140
- Last activity
- Member since
- Following 0 users
- Followed by 4 users
- Votes 3
- Subscriptions 448
Posts
Recent activity by Larry Neblett Sort by recent activity-
S-series PBX Status?
While I understand that Yeastar is understandably more focused on its newer offerings, where does the S PBX model line sit in the scheme of things? Given that the last firmware release dates back t...
-
S20 Allowed Country IP issue
I have a number or S20 installed, but one is now causing an unusual issue. When the allowed country for the US and Canada is enabled (my area), the INVITE from the provider will hit the S20 and the...
-
Bridged PBX BLF support
There have been requests for remote BLF support for extensions connected to PBX systems that are interconnected since 2018 and possibly earlier. 3CX, Grandstream, Vodia, Xorcom, FreePBX and others ...
-
Couple of Initial Issues
Having gone thru the initial setup wizard, the date/time setting was made using the us.pool.ntp.org server and -6 for central US time with daylight savings enabled. Following the requisite server r...
-
Call Waiting not working (ticket submitted to support)
Yeastar made a decision to remove the call waiting function from the PBX, which, by the way, is a gross mistake. Instead they rely upon the phone to respond to the INVITE sent to let the system kno...
-
* does not work when trying to enable two-way from a one way page.
Please see the following post - https://support.yeastar.com/hc/en-us/community/posts/360037130874-No-Audio-on-Paging-Yeastar-S-50?page=1#community_comment_360009353214
-
Yeastar removed call waiting setting from the PBX
In a recent KB article, Yeastar elected to eliminate the call waiting setting for extensions in the PBX instead relying on the user to make the needed settings in the phones associated to the exten...
-
S Series Fax and Life line Question
There is very little info or specifications with regard to the add-in modules. Spec sheets may be available on the site, but I was not able to find them. 1. If I add a FXO module and route the call...