Razvan Constantin
- Total activity 15
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 2
- Subscriptions 5
Activity overview
Latest activity by Razvan Constantin-
Razvan Constantin commented,
Solved the issue with the help of Yeastar support. Valid for any S series PBX. For anyone having this issue, just add the IP(s) of your VoIP provider in local network identification. Strangely eno...
-
Razvan Constantin created a post,
You have dialed a wrong number
Hello, Have a S20 and S50, both with the same issue. Some users need to have Linkus remotely.The PBX allows connections to 5060, 8111 and 10000-12000 only from some external IPs, so it is secure....
-
Razvan Constantin created a post,
External extension not hanging up
Hello, Have a bit of a strange situation.Have an external VoIP phone that registers just fine, can place and receive calls just fine, audio both ways, but...if the I call the extension from an ex...
-
Razvan Constantin commented,
Packet capture (registered) Ôò¡ ÿÿ q Àé!d'G ß ß ôµI÷Br E`Ïå@ @ ÕÀ¨dÀ¨d ÄÄ»Y¢OPTIONS sip:0@192.168.100.12:5060;transport=udp SIP/2.0Via: SIP/2.0/UDP 192.168.100.10:5060;rpor...
-
Razvan Constantin created a post,
No auto provision without Register Remotely
Hello, Firmware: 30.15.0.115Auto provision: 1.11.1 and 1.11.3S50 Lan interface has DHCP enabled.Phones also with DHCP enabled. S50 and a couple of Panasonic HDV130 phones. Both on latest firmware v...
-
Razvan Constantin commented,
Hi Eric, Even if the keypress is invalid?If so, any clue what the "Invalid Option" combined with "Custom prompt" is for then?
-
Razvan Constantin created a post,
S20 | IVR option Invalid
Hello, Trying to setup a simple IVR where the caller has to press some keys.Valid keys setup are 1 to 4.The bottom option "Invalid" is setup to play a custom prompt with a short audio saying "Inval...
-
Razvan Constantin created a post,
Missed call notification - ${calleridcontactname}
Hello, I have a S20 PBX and a question about setting up "Missed call notifications".Hope someone can point me in the right direction.The emails are ariving just fine, but ${calleridcontactname} fro...