Hi,
We are reactivating a S100 Yeastar PBX, it was diconnected for about a Year and our network administrator left the company, we want to reconnect the PBX but we dont know the configured IP address. Is there any way to get the ip address? We want to keep all the other settings.
Thanx in advance
1. Our PBX default IP address is 192.168.5.150 you can try it first.
2.Usually, routers can check the device's IP address in the local network.
3.Also you can check the IP phone host IP setting it should be the PBX IP address.
alternatively, you might connect ip to your network and do a network scan and match the MAC address. You may run into a duplicate IP, so do this when off-hours and be prepared to remove the device should issue arise, like with a dup IP.
Unified Communications
