I have little problem, I want to connect my yeastars TG200 to my remote IPBX via internet.
because my two equipment are not in the same building. can help me with the configuration in my tg200.
I already have my public ip I would have liked to have the configuration.
1 comment
-
Larry Neblett You first need to assess if both locations have a public static IP or if one or both are using a dynamic public IP. Once determined, you need to decide if the connection is to be conducted over the open Internet or via a VPN (preferred).
Ideally, the PBX and TG are sitting behind VPN capable routers and that each location has a static public IP. This simplifies the setup and provides for a more reliable and secure connection between the two locations.
The setup is dependent on if static IP are in use at both location and if not, which one or ones are dynamic. It also depends on if a VPN is to be used or the open Internet.
Please advise to the above first, and more info will follow once the connection method and IP situation are understood.