0

Feature Requests For Gateways

Emre

March 13, 2021 08:47

None

Follow

I hope you take our requests seriously;

• T38 must enable by default
• Devices is not ready to use by default configuration. Need IP>port, Port>IP rules
• Caller ID options filled by "1" by default. It must be "."
• Text/live log without file download in device menu
• Editable device backup/configuration file
• Taliking time limitations for trunk and ports as minutes
• TG100 SIP Trunk hostname character limitation must increase
• TA Gateways is accepting wrong subnet mask and gateway. After the configuration applied, device becoming network unreachable.
• Random port selection must disable by default for TA100/200
• IP-to-PSTN source number manipulasyonu min. 100 line
• IP-to-PSTN Destination number manipulasyonu min. 100 line
• PSTN-to-IP source number manipulasyonu min. 100 line
• PSTN-to-IP Destination number manipulasyonu min. 100 line
• Firmware update via file upload instead of TFTP or HTTP Server

• Facebook
• Twitter
• LinkedIn

5 comments

• 0
  
  Eric Jiang March 15, 2021 11:58

  Hi Emre,

  May I know more details about this issue?

  • TA Gateways is accepting wrong subnet mask and gateway. After the configuration applied, device becoming network unreachable.
• 0
  
  Emre March 15, 2021 12:11

  Hi Eric,

  excuse me I couldn't write properly. 

  I did not test this issue on all TA models but on TA3200 I see this issue. When we set the network information on device like IP Address, Subnet and Gateway IP, It is allow us to type a incorrect info like ;

  IP: 192.168.1.1/255.255.255.0  GW: 192.168.2.1.  After save configuration and reboot the device become inaccessible. I gave the IP address from same subnet like 192.168.1.2 and couldn't ping the device until a hardware reset. As you windows computer gives an warning message if you type an incorrect network information to the ethernet settings. Maybe you can do that. 

• 0
  
  Eric Jiang March 16, 2021 03:44

  Hi Emre,

  Thanks for the details. This will definitely have a better experience when configuring the IP address, I will submit it to the PM.

• 0
  
  Emre March 26, 2021 18:54

  Hi Eric Jiang Please add the below comman into default configuration of new firmware

  cd /persistent/support/
  add.sh
  #!/bin/sh
  echo "fxo set ringing polarity count 1" > /proc/module/fxo

  this command fix ring detection problems. 

  Thanks

   

• 0
  
  Emre March 28, 2021 07:34

  Hello,

  FXS Gateways is not forwarding the calls (always, busy, no answer) if the T38 enabled in port settings. Please fix it as well.