Unified Communications
hello
i have a TG200 V2 with firmware 53.18.0.46 , the only way to update it is by using http or tftp
What is the url for the update ?! is there a new firmware ?
thank you
Date
Votes
1 comment
-
Craig Hi Tarek,
Firstly you need to download the firmware from Yeastar's site.
Then you need a TFTP server (Your computer is the url you are asking for). Open a command prompt and type ipconfig. This will give you your list of Network adaptor addresses.
Put the TG on the same network as you computer, then:
Run the TFTPD32 / TFTPD64 program
Configure TFTP settings and navigate to map the root directory of the URL to the folder on the C drive (or wherever you have the bin file).
Then you type the IP address you have in your TFTP server as the url (so if your ipconfig returned 192.168.0.104, you would type tftp://192.168.0.104 as the server address).
That's it. it will start to upload the file. Don't interrupt the connection while it's upgrading, and be patient - it needs to upgrade then reboot.
If it's a major upgrade then I'd recommend before upgrading, back up your config file (I'd do that anyway).
The following is for S series but it is the same process. I use 3CDaemon or a linux tftpd server.
https://help.yeastar.com/en/s-series/topic/upgrade_firmware_by_tftp_method.html
I hope it helps you.
Best regards,
Craig.
Please sign in to leave a comment.