Hello im testing the Hot Standby in my S100 but I have a question with the option Unilateral WAN Port the idea is to connect to both of my S100 the SIP Trunking services?
In my case, the ISP installs on-premise a router that has the SIP Trunk services this router has 4 ports.
So I need to connect both S100 WAN Ports to the router and enable the Unilateral WAN Port option and this will work when the MAIN S100 is down?
Hi Joan, I think it will work because the WAN port in the secondary server is disabled when you use the Unilateral WAN port feature. So there is only one active port in HA mode.
Hi ,
Unilateral, Can is work with DHCP mode on WAN port ?
Hi Nuttapol,
1. The PBX can get IP address without issue but not the gateway IP address,it will impact the static route setting, we can ask the R&D to build a new firmware to fix it.
2. Will the gateway IP address changed on the provider side? The gateway IP address will not change automatically in the static route.
Hi Eric Jiang,
Thanks for quick reply. Sound good for new firmware It 's will convenient to setup static route.
It will better if can add the hostname in static route
The gateway doesn't change when DHCP update.
Microsoft Teams Integration
Hikvision Intercom Integration
ISDN Switch-off Migration
All materials to evaluate Yeastar as a PBX vendor on products, solutions, partner program, support, learning resources, etc.
