It would be nice that there is no need that PBX extension must be different, because if you have two PBX which both have 1xx extension range, it can recognize PBX by prefix number. That why it can be solved that PBX have same extension range and that they can be connected. So if you want to call from first PBX to second you will call 2101 for local extension 101 on second PBX and if you want to call from second PBX to first PBX you will call 1101 for local 101 on first PBX
Date
Votes
3 comments
-
Eric Jiang Hi Emir, Yes, for the called number you are right but you also need to change the caller id. You can try to configure the DOD for each extension and add prefix when dialing out to test.
-
Djedje Raw Hi all,
I'm new in this topic and want to get some knowlage about multisite interconnxion.
Have I need any particular module to interconnect 5 IPBX (Yeastar S50) ???
I have to interconnect 5 site in different network (The network is all ready works).
Thanks
-
Eric Jiang Hi Djedje, No extra module is required for the multisite feature just make sure the PBX can access each other but please note the concurrency depends on the headquarter PBX because every calls between the branches needs to go through the headquarter.
Please sign in to leave a comment.