Unified Communications
I already have a couple of S-300 exchanges with module ex30 for E1, but now I need a new pbx for a branch that does not have more than 20 extensions and that I enter through an E1 line.
That they recommend me, that I do not have to use a gateway in the middle, I need that the pbx has all the benefits in a single team. Thank you.
Date
Votes
4 comments
-
Gregery Armbrust What about the S20
-
Cboniakowski Gregery the S20 dont accept EX30 Board for E1.
-
Riddhe M If the branch site has E1 line. You can deploy a S100+EX30.
But it's strange that 20 users using a 30 channels line.
-
Larry Neblett It is not clear by what is meant as a single team. If this is meant to indicate that all extensions in every branch should have the same access to the same features in all sites, then this is not possible.
As an example there is currently no way to make the branch A PBX be aware of the extension in any other branch such that you could add extensions from the other branches into a ring group on PBX A. You can not call park across branches. There are other limitations as well.
You can have direct extension to extension dialing across branches and you can dial thru to the other branch trunks.
If you truly need to have the "all in one" functionality, then you might be able to simply establish a VPN between the branches and connect the 20 extensions into the S300.
Ridhe - the E1 is only the interface type, but they may have a fractional E1 in that it is only supporting X channels and not the full complement. If it is, then I too share your observation.
Please sign in to leave a comment.