Yeastar S20 was working fine for most of Yeastar until recent latest firmware update (30.10.0.67). Know both inbound/outbound calls drop around the 3 -3:15 minutes.
We are using SIP Trunking, tested with all phones in our office, which are a mix of various brands Yealink T46G, GS GXP2160.
We are hoping that maybe there is a timeout setting or some new check mark somewhere.
Any help is appreciated.
Fred
We fully did a factory restore, with the new firmware. The only item that comes to mind was under:
Settings>General>Call Duration
This is default at 6000 (6000/60 = 100hrs)
If I understand correctly this is saying calls cannot go past 6000 minutes, which way over plenty. To test we left it default and seems to be working at the moment (along with the full factory reset).
Anyone has any suggestions, they are well received.
Thank you
Fred
Hi Fred, the Call Duration unit is seconds, not minutes.
Microsoft Teams Integration
Hikvision Intercom Integration
ISDN Switch-off Migration
All materials to evaluate Yeastar as a PBX vendor on products, solutions, partner program, support, learning resources, etc.
