Unified Communications
I am installing a S100 and with a Valcom over head paging system. Valcom wants a TIP and RING add to the its contact. Any suggestions on what I need to make this work ?
Thanks in advance my first install
Date
Votes
4 comments
-
Oscar Colka Didn't use Valcom before. Did Valcom supports for SIP procotol?
Here I found what Yeastar SUpported:
-
Larry Neblett Please advise the model number of the Valcom unit. They make numerous paging devices and without knowing more, it is not possible to provide informed advice.
-
ANACOMM SYSTEMS - Andrew Waddle We have been installing Yeastar systems for some time and we have been installing Valcom paging systems for years. Everyone wants to sell you a sip page adaptor to do it. But I have a old school trick I have been using for years. I have about 60 systems right now doing it and it cost about $50 to do it. I use a yealink T-19 phone. Open the back and cut the speaker leads and connect the 2 leads to the Valcom paging Tip and Ring. Put the phone in auto answer and your good to go. Just register the phone and when you dial the Ext. you are paging. Old school trick been using for years and will not do it any other way. And you can't beat the price. I sell it as a IP page pack. I mount it at the Board. Bonus you can use it as a phone as well Just pick up the handset. Been Doing this With digital phone systems and now IP systems for about 30 years. Valcom Sip IP page packs run about $400 I will win all quotes when it comes to IP paging.
-
Gregery Armbrust Thank you community for all the help, I will be trying th SNOM PA1 and Andy Waddle suggestion so I can learn from both.
Again big thanks for taking the time to answer and help me.
Please sign in to leave a comment.