S100 with IP SIP phone , outgoing call to BRI
Ougoing call « 0 » then outside number
Randomly from any IP Phone when they made ougoing calls , numbering not realized, screen on IP phone return at original
After 2 or 3 or 4 (or more) trying same outgoing call number is realized
Sometime work well immediatly at first number call and next one problem again
Have you an idea ?
Why a "0"?
As this is usually reserved for what most perceive as an operator/receptionist, it just seems odd, but not necessarily wrong.
The first question is - "what does the provider need to see in order to process a call"? Does it vary from one to abother such as local, national, international, etc.?
Is the 0 really needed by the provider or is it a prepended number used to reach a rule that goes to a provider? From your post, it seems to be just to reach the rule. Does the rule strip 1 to remove the "0"?
Is there really a reason that the number needs the 0 or this just a holdover from a previous system?
Do the extension owners enter in 0XXXXXXXXX or whatever number is desired and press send/dial/# to to tell the phone to dial the string or do they wait until a timeout occurs and the phone then sends the string?
Microsoft Teams Integration
Hikvision Intercom Integration
ISDN Switch-off Migration
All materials to evaluate Yeastar as a PBX vendor on products, solutions, partner program, support, learning resources, etc.
