Unified Communications
I have about 10 S20's with Yealink phones. I was wondering is there a way to access the phones remotely. I can log into the systems and navagate to the auto provision page and see the remote locale address but not able to access. is there a way to access yealink phone remotely
Date
Votes
2 comments
-
Larry Neblett I assume "accessing remotely" means that you would like to access the phone web page in order to see or set/change settings.
If this is the case, then perhaps, but it requires that you have access to and can control the remote router by which you can implement port forwarding of port 80 or 443 (both TCP) to the IP address of the phone(s). You will then need to change the forwarding as you finish working on one phone to point to the IP of the next phone and so on if there is more than one phone behind the firewall. Once done, you should remove the forward to prevent unwanted entry by others from the Internet.
-
Jonathan You can just use the ssh tunnel into the yeastar to set up a socks proxy so you can use your browser to access the phones on the remote lan.
https://www.adamfowlerit.com/2013/01/using-firefox-with-a-putty-ssh-tunnel-as-a-socks-proxy/
Please sign in to leave a comment.