0

How to connect S100 to MyPBX for outbound calls

Gherick Nazaire

May 19, 2018 07:55

None

Follow

Hi I have a S100 PBX and one MyPBX i want to enable my S100 to make outbound call without using FXO thru MyPBX which have Physical Trunks is it possible to do that. Sorry for bad english. Thanks

• Facebook
• Twitter
• LinkedIn

4 comments

• 0
  
  Gherick Nazaire May 19, 2018 08:15

  Hi i just want to ask is it possible to configure my S100 to connect to my U200 i want to enable my S100 to do outbound calls. My U200 had lines connected thru its FXO thats why it can make outbound calls it is possible to connect my S100 to my U200 and use the FXO port on my U200 to do outbound calls with my S100? thanks

• 0
  
  Larry Neblett May 20, 2018 09:45

  As long as both devices support SIP, then they should be able to interconnected. 

  I have a attached a guide on how to connect 2 S-PBX together. While not the same model as your U, it may provide enough detail by which you can make a go of it. 

   

  https://support.yeastar.com/hc/en-us/articles/115011266667-How-to-Connect-Two-Yeastar-S-Series-VoIP-PBXs

• 0
  
  Gherick Nazaire May 20, 2018 11:22

  Hi @Larry Neblett do you have a guide on how to do it on S100 to U200? Thanks

• 0
  
  Larry Neblett May 20, 2018 22:37

  No. Hence, why I sent what is available. The process to hook up any SIP device is essentially the same.