Hi, Just like in S-series PBX, the feature Enable Outbound Proxy feature is available when using a Register Trunk. It is useful to some PBX providers have a requirement of using Outbound Proxy.
However upon testing to trunk TG400 Yeastar GSM Gateway this feature is now available in the Gateway so I cannot manage to connect the GSM gateway to the cloud PBX.
Thank you!
Do you mean you have problem register the TG400 gateway to Cloud PBX?
Did this happen when you enable outbound proxy or disable proxy?
Could you describe your problem in more detail.
I had a typo error sorry.
"However upon testing to trunk TG400 Yeastar GSM Gateway this feature is NOT available in the Gateway so I cannot manage to connect the GSM gateway to the cloud PBX."
When I use Register Trunk in the TG400 gateway, there is no option to "Enable Outbound Proxy" compared to S-series PBX when you use Register Trunk, there will be an option at the bottom to "Enable Outbound Proxy"
Try put the proxy host into the hostname/IP setting on the TG400 and check if that help.
Microsoft Teams Integration
Hikvision Intercom Integration
ISDN Switch-off Migration
All materials to evaluate Yeastar as a PBX vendor on products, solutions, partner program, support, learning resources, etc.
