Hello, i've tried to install linkus app on my S100. But my WAN interface is connected to sip provider, and there is only SIP and no internet connection.
I don't realy want to unplug and reconfigure my S100 for internet to install one service, is there any way to recieve a direct link to download the app?
I think there are two ways to fix this:
First way is: Setup static route on S Series PBX and allow S PBX to access Linkus server (probably need to setup statc route for DNS server as well) through LAN port; I think you can ask from yeastar support team regarding the address of the Linkus server;
Second way: Check with Yeastar if they can provide you an offline installation package for Linkus.
Good day
Our S50 is also connected to the SIP provider via the WAN port with no internet access.
Is it possible to setup Linkus to work through the LAN port over my own internet while all VOIP calls still go out over the WAN port?
If this is possible how must I configure the S50 for internet access on the LAN port? I don’t want to change the WAN settings of our SIP provider.
I did a test and entered my own internet network IP range and gateway settings on the LAN port of the S50, but I got no internet access on the S50 and Linkus does not work either. (The network mode of the S50 is on DUAL with WAN as the default interface – When I make LAN the default I get internet access on the S50, but I think the VOIP calls then also go through on LAN instead of WAN?)
I am running firmware 30.9.0.20 with all other applications updated to the latest versions.
I have attached a simple layout of our setup.
