If in "SIP to GSM" route configuration I use Caller ID with special characters, received BUSY signal and ''SIP/2.0 603 Declined'' - SIP message in debug. For example Caller ID 7XX, 7[0-3]0, XXX. I'm calling from a number 710. If I change it to explicite Caller ID 710 - get a successful connection. Tried two firmware versions, now - 55.18.0.46.Inde
I didn't experience with the same issue before. Do you mind sharing screenshot of your IP to GSM routing page?
Hi, i have similar problem. Probles appear always when I tried to call from my IP PBX via TG400.
I get Declined response from TG400:
<--- Reliably Transmitting (NAT) to 10.58.0.15:5060 --->
SIP/2.0 603 Declined
Via: SIP/2.0/UDP 10.58.0.15:5060;branch=z9hG4bK59d6d247;received=10.58.0.15
From: "201 201" <sip:201@10.58.0.15:5060>;tag=348611d0ac5a6b97
To: <sip:661550770@10.58.0.23:5060>;tag=as265ddc6f
Call-ID: d3bb67ddef6948db77f82953c0b3d7ba@10.58.0.15
CSeq: 1 INVITE
Server: TG400
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO
Supported: replaces, timer
Content-Length: 0
<------------>
Here some logs from gateway:
[2017-05-31 14:04:48] NOTICE[1416] chan_sip.c: [YEASTARDNSMAP] Get peer by ip and toexten:661550770
[2017-05-31 14:04:48] WARNING[8167] app_setcktcustom.c: set send rpid yes, but macrocontext(Routeout_IP_GSM_WAW->GSM2) is not valid!
Here is configuration of rule IP to Mobile.
Could you help me with configuration?
Just do not use characters like that - "X", "-", ".". But it works with a Caller ID in the format : 100[12356]
Unified Communications
