0

Direct in Dial from SIP Trunk

Troy

August 07, 2016 16:49

None

Follow

Hi All,

Can anyone point me in the right direction for configuring direct in dial with a SIP trunk on a U100 MyPBX device?

Cheers in advance

• Facebook
• Twitter
• LinkedIn

14 comments

• 0
  
  Oscar Colka August 08, 2016 12:02

  Troy, do you mean configure DID for the SIP trunk? Not very sure about what you would like to do.

• 0
  
  Troy August 08, 2016 12:06

  Hi Oscar,

  Correct - so i have a provider based SIP trunk with a 20 number range. I need to setup direct in dial so people can call directly to an extension.

• 0
  
  Oscar Colka August 08, 2016 12:31

  Hi Troy, try follow below screenshot,

  

• 0
  
  Troy August 08, 2016 14:03

  ok so just to confirm if my number range was 08 6180 1700 - 1720

  i would put 0861801700 - 0861801720 into the DID number field.

  Does the extension number have to match or can it be say 300 - 320?

• 0
  
  Troy August 08, 2016 14:03

  BTW - Thanks for your assistance! :)

• 0
  
  Oscar Colka August 09, 2016 01:11

  :)

  Troy, the extension number can be 300-320. 

• 0
  
  Troy August 09, 2016 01:14

  Thanks Oscar - and that number range is correct? IE It's the full number?

• 0
  
  Oscar Colka August 09, 2016 01:43

  Yes, the number range should be the full range, for example, 

  DID Range: 0861801700-0861801720

  Extension Range: 300-320

• 0
  
  Troy August 09, 2016 01:46

  Brilliant - one last question. How do you get one specific number to go to a ring group rather than an extension?

  EG the main number say 0861801700 needs to go to a ring group rather than extn 300?

• 0
  
  Oscar Colka August 09, 2016 10:09

  For this case, you will need to setup another separated inbound route and choose the ringgroup as the destination. See below screenshot:

  

   

• 0
  
  James Lim September 01, 2016 10:02

  Hi,

  I am using S100. If my extensions are as below, how to type?

  68134131
  68134132
  68134133
  68134135
  68134136
  68134137
  68134138

  match with
  801
  802
  803
  805
  806
  807
  808

• 0
  
  Oscar Colka September 01, 2016 10:10

  Try below:

  
  
  

• 0
  
  James Lim September 02, 2016 01:49

  Thanks Oscar.

  But if people calling 68134134, I don't want the number direct to 804. How to exclude this?

• 0
  
  Oscar Colka September 02, 2016 02:46

  I didn't try but I think you can try create another inbound route and put this route at the top of the inbound routes page and specify the DID as 68134134 and setup the proper destination.