0

inbound routes

Jean-Eric Oré

September 05, 2016 15:01

None

Follow

 hello I want to configure Myipbx U100 about inbound routes for incoming calls. I have a T0 line.

• Facebook
• Twitter
• LinkedIn

6 comments

• 0
  
  Oscar Colka September 06, 2016 08:38

  Jean, Do you have specific requirements or problems?

  To setup inbound routes, if you don't have special requirements, you just need to select the trunk and setup proper destination. See below screenshot for reference,

  

• 0
  
  Jean-Eric Oré September 06, 2016 15:02

  thanks Oscar,

  I have not specific requirements. just to receive and make calls from ours pstn line. 

  Please what kind of trunk do you mean, because we use only SIP. We have to creat trunk?

• 0
  
  Oscar Colka September 07, 2016 05:18

  Yes, if you use SIP trunk, you need to get SIP account detail first from a SIP trunk service provider, then create a SIP trunk in the MyPBX and fill in the information you got from the SIP trunk service provider. 

• 0
  
  Oscar Colka September 07, 2016 05:21

  By the way, I found a list of supported/tested SIP trunk provider from Yeastar website: 

  http://www.yeastar.com/itsp-partners/ 

• 0
  
  Jean-Eric Oré September 07, 2016 17:56

  great, 

  but am in ivory cost, can I use one of this SIP trunk provider?

   

• 0
  
  Oscar Colka September 08, 2016 08:19

  Sorry, I am not very sure if these trunk provider can cover Ivory Coast. I would suggest you to check with them directly or google for a local provider if there is any one available. :)