Dear Support Team
The problem is the phone getting the time (NTP) from yeastar display the time incorrectly, the phone manufacture advise us to change the value on the IP-PBX (NTP) setting, by alter the “stratum” value to 1.
ls it possible to fix / change this value on the box?
Thank you
Best Regard
Ms.Krongchit Tansakul
Poise Technology Co.,Ltd
Tel: (66)2-656-8598 ext.1016 Fax: (66)2-250-9769
Email : krongchit@poisetechnology.com Website : http://www.poisetechnology.com
Hello Krongchit,
We are struggling to fix this issue. However I am not sure the exact time it will be fixed. Please watch our release note in the later version.
Thank you.
Also I have this problem with MyPBX U300 (firmware 12.19.0.48) and yealink phones. http://support.yealink.com/faq/faqInfo?id=366". In capture between PBX and phone, I can see in the pcap file the Clock stratum parameter is 0 but the file /etc/ntp.conf in U300 I can see:
server pool.ntp.org
server time.nist.gov
server 0.pool.ntp.org
server 1.pool.ntp.org
server 2.pool.ntp.org
server 127.127.1.0
fudge 127.127.1.0 stratum 9
driftfile /persistent/etc/ntp/drift
broadcastdelay 0.008
Where I can change the parameter to change stratum in the service ntp? or there is a temporary manual process to correct this error?
Microsoft Teams Integration
Hikvision Intercom Integration
ISDN Switch-off Migration
All materials to evaluate Yeastar as a PBX vendor on products, solutions, partner program, support, learning resources, etc.
