0

NeoGate TAXXX incoming P2P calls

Filip VORBA

March 24, 2016 15:57

None

Follow

Hello,

does anyone know if Yeastar TA NeoGate support incoming P2P calls?If yes, what is the right SIP URI? Can you call separate analog extensions?

Outcoming P2P calls are working.

Tested on TA200.

Filip

• Facebook
• Twitter
• LinkedIn

3 comments

• 0
  
  Oscar Colka March 25, 2016 02:32

  Hello Filip,

  Yes, it is possible, I just got this working. You need to do two things:

  1. Allow Guest Call on Yeastar TA's SIP settings page;

  2. Customize extensions.conf, see below:

  Before customized:

  [default]
  exten = h,1,NOOP(no thing to do)
  exten = h,2,Hangup()
  exten = t,1,Hangup()
  exten = T,1,Hangup()

  ----------------------------------------

  After Customized:

  [default]
  exten = h,1,NOOP(no thing to do)
  exten = h,2,Hangup()
  exten = t,1,Hangup()
  exten = T,1,Hangup()
  include = internalcall

   

  After above two steps, you can dial *9901 to reach port 1 of TA, *9902 to reach port 2, and the like;

• 0
  
  Filip VORBA April 01, 2016 14:49

  Hello Oskar,

  thank you very much for your answer!

  I did try it, but do not work for me with TA200.

  I think it is because TA200 cannot dial the second port without PBX.
  Or it do not work in my case. (manual says, it is possible if dial the caller id of port)

  I will try it with TA400.

  Filip

   

   

• 0
  
  Franz Ruben Grion October 14, 2016 12:23

  Hello, I need to perform this same ecenario but with a TA200 and ta410, but I followed the steps in this example and I can not make this possible, as? Thank you
  
  

  Connecting TA FXS Gateway to TA FXO Gateway

  

  Mandy Wang

  September 01, 2016 05:52

   

  1. Introduction

  For companies that have geographically distributed office, there is no need for them to install a PBX at the remote offices. Users could simply set up TA FXS Gateway and TA FXO Gateway in remote offices without any SIP server. This scenario allows organization with remote location to access FXO(PSTN) trunks through IP network.
  In this guide, we introduce how to connect TA FXS Gateway (located in US) and TA FXO Gateway (located in China). After connecting, users in US could make local calls through PSTN trunk located in China and save international charges.

  https://support.yeastar.com/hc/en-us/articles/218283447-Connecting-TA-FXS-Gateway-to-TA-FXO-Gateway