I have a tg400 that I connect with yeastar s300, I want to make 4 route phone from ip to mobile.
I want to be like this,
number 085847XXXXXX can be dialed through tg400 GSM1,
number 087757XXXXXX can be dialed through tg400 GSM2,
and others,
anyone can help me?
9 comments
-
Oscar Colka Yes, I think this is possible. You can created 4 SIP accounts in the TG and then register 4 SIP trunks on the S PBX.
After that, setup 4 outbound routes in the S PBX and 4 IP to Mobile routes in the TG.
-
ludhi dear Oscar Colka
I have setup 4 outbound routes in the S PBX and 4 IP to Mobile routes in the TG, but the calls are always busy, why is that?
-
ludhi dear Oscar Colka
I want to make outbound route does not use prefix 1 or 0, but directly using number destination, example I will call 085XXXX number, I dial directly 085XXX, not dial 1085XXX ,,
-
ludhi I have made like the picture above but call out still busy
-
Oscar Colka Hello, I would suggest you to get some asterisk CLI logs on the TG and post here.
Login TG via SSH, after that execute below command:
asterisk -vvvvvvvvvvvvvr
then make the calls and copy the logs here.
If this is too complex for you, I would suggest you to submit a ticket and get help from Yeastar Support Team.
-
Oscar Colka I think another way to fix this the difficult is change the SIP trunk mode on TG to Account mode but not using the Service Provide mode.
With the account mode, there will be 4 SIP trunks on S PBX and you will be able to select different SIP trunks for different outbound route.
Remember to reboot your TG and S PBX if you change the SIP trunk mode.
-
ludhi dear Oscar Colka,
I have finished with your suggestion, but the outgoing calls is still busy, why?
and in the calls log there is no outgoing call log. -
Oscar Colka Hello Ludhi,
Try register the accounts on your IP phone and see if you can dial out. If not, the issue probably at TG side.
I would suggest you to get some logs and post here or submit a ticket to see if you can get help from Yeastar Support team.
-
Osama Akram Younes hello , i have tg400 , i am able to make calls from sip phone using gsm1 . but i cant get another sip phone to call from gsm 2. please i do need your help
note that i use elastix server