tengo una central U100 cuando quiero que inicie me sale este error:
Texas Instruments X-Loader 1.51 (Nov 9 2012 - 15:28:15)
U200 xM Rev A
Booting from nand . . .
Starting OS Bootloader ...
U-Boot 2010.06-rc1-svn ( 3? 19 2013 - 09:57:53)
OMAP34xx/35xx-GP ES2.1, CPU-OPP2 L3-165MHz
U200 board + LPDDR/NAND
I2C: ready
DRAM: 512 MiB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
MAC 0 : F4:B5:49:06:11:20
MAC 1 : F4:B5:49:06:11:21
Press "RESET" down for 5sec. to reset to factory settings: 0
Net: ks8851
Hit any key to stop autoboot: 0
Loading from NAND 512MiB 1,8V 16-bit, offset 0x400000
Image Name: Yeastar U200
Created: 2013-09-12 2:54:11 UTC
Image Type: ARM Linux Multi-File Image (gzip compressed)
Data Size: 29791255 Bytes = 28.4 MiB
Load Address: 81000000
Entry Point: 81000000
Contents:
Image 0: 2186516 Bytes = 2.1 MiB
Image 1: 27604727 Bytes = 26.3 MiB
NAND read from offset 19a0000 failed -74
** Read error
## Booting kernel from Legacy Image at 88000000 ...
Image Name: Yeastar U200
Created: 2013-09-12 2:54:11 UTC
Image Type: ARM Linux Multi-File Image (gzip compressed)
Data Size: 29791255 Bytes = 28.4 MiB
Load Address: 81000000
Entry Point: 81000000
Contents:
Image 0: 2186516 Bytes = 2.1 MiB
Image 1: 27604727 Bytes = 26.3 MiB
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
Loading from NAND 512MiB 1,8V 16-bit, offset 0x4400000
Image Name: Yeastar U200
Created: 2013-09-12 2:54:11 UTC
Image Type: ARM Linux Multi-File Image (gzip compressed)
Data Size: 29791255 Bytes = 28.4 MiB
Load Address: 81000000
Entry Point: 81000000
Contents:
Image 0: 2186516 Bytes = 2.1 MiB
Image 1: 27604727 Bytes = 26.3 MiB
NAND read from offset 5b20000 failed -74
** Read error
## Booting kernel from Legacy Image at 88000000 ...
Image Name: Yeastar U200
Created: 2013-09-12 2:54:11 UTC
Image Type: ARM Linux Multi-File Image (gzip compressed)
Data Size: 29791255 Bytes = 28.4 MiB
Load Address: 81000000
Entry Point: 81000000
Contents:
Image 0: 2186516 Bytes = 2.1 MiB
Image 1: 27604727 Bytes = 26.3 MiB
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
Using ks8851 device
TFTP from server ; our IP address is
Filename 'uImage.ext2'.
Load address: 0x88000000
I need help
