0

Linkus Extension Other S100

Paulo

October 16, 2017 14:28

None

Follow

Hello.

 

I have 2 s100, and i connect the pbxs to vpn lan to lan.

it is possible to have the extensions of the two pbxs in the linkus ?

Best Regards

• Facebook
• Twitter
• LinkedIn

2 comments

• 0
  
  Larry Neblett October 16, 2017 21:20

  While I have not tried it, I am doubtful as this implies two separate accounts associated to a different SIP server for each account. When I look at the LINKUS interface, I see "ME". I wonder if it will change to "US" if it should take more than one? The only way to find out is to try. 

   

  I will be curious as to what you discover. 

• 0
  
  Oscar Colka October 17, 2017 01:11

  Linkus supports for only one extension so I believe it is not supported to connect directly to two PBX at the same time. But I have an idea for this:

  As you have connected two S100 together, you will be able to dial from extension of PBX A to extension of PBX B freely. So the idea is to setup on PBX A and configure extension to always forwarding to Linkus on PBX B, then when people dial extension on PBX A, Linkus will receive an forwarded call from PBX A. That is indirect way to connect Linkus to two PBXes.

  Hope I explain my idea clearly.  : )