0

TA410

Eugene Misyakov

February 28, 2017 19:58

None

Follow

I cant  call from pstn to my FreePBX trought TA 410. In asterisk logs(yeastar) i see next:

[2017-02-28 22:15:42] WARNING[6085]: app_setcktcustom.c:73 set_ckt_custom: set send rpid yes, but macrocontext(Routeout_Port2IP_from301842) is not valid!

-- IAX2/trunk-spx-10.24.21.61-902 is ringing

-- IAX2/trunk-spx-10.24.21.61-902 is circuit-busy

-- Hungup 'IAX2/trunk-spx-10.24.21.61-902'

== Everyone is busy/congested at this time (1:0/1/0)

When i restart Dahdi

TA410*CLI> dahdi restart

[2017-02-28 22:17:41] ERROR[6084]: config.c:1101 process_text_line: The file '/etc/asterisk/digital-channel.conf' was listed as a #include but it does not exist.
== Parsing '/etc/asterisk/users.conf': == Found

 

Can someone give me this file? I think I've accidentally deleted it.

reFlash firmware doesn't help.

 

 

 

 

• Facebook
• Twitter
• LinkedIn

3 comments

• 0
  
  Oscar Colka March 01, 2017 07:32

  Eugene,

  I found digital-channel.conf file doesn't exist in my test TA410 either so I think that is not the reason why you fail to call to your elastix.

  From the logs you posted, I think the problem would be the routing setting in the FreePBX.

  -- IAX2/trunk-spx-10.24.21.61-902 is ringing   this line indicate that the call has been sent to the FreePBX, 

  While this line:

  -- IAX2/trunk-spx-10.24.21.61-902 is circuit-busy

  Indicate that the call seems been rejected by the FreePBX

   

  Try capture some CLI logs on your FreePBX to make sure the call has been arrived at the FreePBX.

   

• 0
  
  Eugene Misyakov March 01, 2017 10:29

  ok thx. i understand where is problem. Can you answer else:

  1 one 3 lines have pulse dial. Can i change dahdi configuration file to pulsedial=yes or TA410 didn't support it?

• 0
  
  Oscar Colka March 06, 2017 07:53

  my yeastar support representative told me that plusedial is not supported on the TA410