Applicable Devices:
3CX PBX
GrandStream PBX
FreePBX
Yeastar S Hardware PBX
Yeastar S Cloud PBX
Yeastar K2
Yeastar P Hardware PBX
Yeastar P Software Edition
Description:
Version: 1.0.0
Updated time: 2022/08/05
Highlights:
1. work without installation
2. Allow you to covert the files(most of them are extensions or contacts) of other PBX to the new files which can be imported into P Series
3. Only windows supported
Instructions:
Here we take 3CX as an example,not all the files are supported,please find the requirement in the table below
PBX |
Supported files and required file name |
||
3CX |
extensions.csv |
contacts.csv |
|
GrandStream |
export_sip_extensions.csv |
|
|
FreePBX |
extensions.csv |
|
|
S Hardware PBX/K2 |
extensions-*.csv |
companycontacts-*.csv |
* means match all |
S Cloud PBX |
extensions-*.csv |
companycontacts-*.csv |
|
P Hardware/P Software Edition |
*-extension-*.csv |
companycontacts/inbound route/outbound route are the same as PCE,so you just need export from PAE/PSE and then import into PCE |
1) Export files from PBX
2) Download the Yeastar File Converter
3) unzip it and then double click “3CXToP”to run it
4) Choose the source PBX and destination PBX ,then click “Folder”icon to choose the folder which contains the exported files,the tool will search the files by the name in the requirement table above
5) Click start to start covert files,in this step the tool will check the first line of the files,will give you alert if not match,you can find the first line requirement in the folder "File format examples" and do some changes if check failed,If there is no alert and the button showing “Done”,then go and get the files under the “output”folder
6) Import the extensions or contacts into the P series
Download Link
0 Comments