How to Configure Telekom CompanyFlex Sip Trunk in P series PBX

Follow

1. SIP Trunk Settings

    1) Basic

  • Transport should choose "TCP"
  • Username is the "Registration Number"
  • Authentication name is the "Registration number + @tel.t-online.de"
  • Outbound-Proxy: is the "primary outbound proxy" which provide by Telekom

mceclip0.jpg

    2) Inbound caller ID reformatting

mceclip6.png

    3) Sip Headers

  • Get Caller ID: FROM
  • GET DID from: P-Called Party ID

mceclip5.png

 

2. SIP Settings

    1) General

  • TCP protocol is required
  • SIP endpoint registration timers should be more frequency

企业微信截图_17068380029459.png

     2) Session Timers

  • Session Timer choose No

mceclip3.png

 

P.S: If there is an issue when using CompanyFlex sip trunk on P series PBX just feel free to submit a ticket from our support portal

 

 

 

 

Have more questions? Submit a request

3 Comments

Date Votes
  • 0
    Avatar

    Hi,

    It works only on a ISP connection directly from Deutsche Telekom. Calls and registration dont work good from other ISP to Deutsche Telekom.

  • 0
    Avatar

    If port 5060 doesn't work, please try to use port 0. 

  • 0
    Avatar

    If it still has the sip trunk registration issue. Please check the exact DNS address offered by Telekom and configure it in PBX’s network settings page. 8.8.8.8 Or any other DNS address would no work. Most of the unable to call in/out issue is caused by invalid DNS configured.
    If the sip provider's DNS doesn't work, please try to use the below DNS to see if it can solve the issue. 


     

Please sign in to leave a comment.